Makita LXT Twin Pack 18V DTD170Z Impact Driver + DHP481Z Combi Drill

£319.95 inc. VAT

Out of stock

  • Ergonomic soft rubber grip design for vibration absorption and comfortable operation
  • Twin LED job lights with pre-glow and afterglow features
  • Variable speed control by trigger with electric brake
Makita authorised online reseller
EAN: 0083881827317 SKU: DTD170Z+DHP481Z Categories: , , , Popular Searches:

Makita LXT Brushless Twin Pack 18V DTD170Z Impact Driver + DHP481Z Combi Drill Bodies Only

 

Makita DTD170Z

  • The new Makita DTD170 impact driver is technically a 6-function impact driver, with four speeds and matched impact power: then the newly introduced operating mode, ‘T-Mode’ is used for tightening self-drilling Tek screws and the new A-Mode (Assist mode) which, when selected starts the rotation slowly allowing maximum control of the screw as it starts to bite into the material. Once the impact driver detects the screw tightening it switches to full speed and full impact power to complete the tightening sequence. The A-Mode is designed to eliminate ‘screw cam-out’ and ‘cross threading’ caused by high speed rotation before the screw bites in the material.
  • The new Makita DTD170 generates a massive 175 Nm maximum tightening torque with four impact speeds and power stages ranging from soft setting of 1100 rpm and 1100 impacts per minute; through medium and hard setting levels up to a maximum of 3,600 rpm and 3,800 ipm. This impact driver handles high strength bolts up to M14 and 22x125mm coarse thread screws.
  • In line with all new Makita tools the performance increases whilst the overall size of the machines decreases. The new top-of-the-range Makita DTD170 impact driver has a compact overall body length of just 117mm and weighs only 1.5kg.

 

Makita DTD170Z Features

  • New impact mode, ‘Assist-Mode’ drives slowly to start screw before full tightening to eliminate “screw cam-out” and “cross threading“
  • TEK mode (‘T-mode’) reduces impact power during final stages of fastener seating
  • Electronic 4-stage impact power selection
  • Massive 175 Nm max tightening torque
  • More compact body with overall length of just 117mm and lightweight at only 1.5 Kg
  • Brushless DC motor with high power to weight and size ratio
  • Brushless DC motor generates less heat buildup and is ideal for prolonged use in manufacturing / production applications
  • One touch sliding chuck for easy bit installation and removal
  • Twin LED job lights with pre-glow and afterglow features
  • Ergonomic soft rubber grip design for vibration absorption and comfortable operation
  • Variable speed control by trigger with electric brake

 

Makita DHP481Z

  • The Makita DHP481 LXT combi drill is powered by an 18v lithium-ion battery and the brushless motor enables up to twice the run-time of traditional motors. This two-speed drill will run up to 2,100rpm in high gear and 550rpm in low. It will deliver 31,500 impacts per minute in high gear and 8,250 impacts per minute in low gear. The 13mm single sleeve keyless chuck enables 16mm capacity in masonry, 13mm in steel and a massive 76mm in timber. Torque can be adjusted to 21 alternative settings and has a dedicated drilling mode. The DHP481 will generate 60Nm of fastening torque (soft joint) and between 115-125Nm (hard joint), the highest torque yet from the Makita 18v range.
  • There are twin LED job lights with afterglow once the variable speed trigger is released and a new side handle configuration gives light tool control. Coupled with the soft grip ergonomic handle design positive drill-driver capability is assured. It weighs just 2.7kg, and is more compact (20mm shorter) than the previous BHP458 model. Batteries and charger sold separately.

Makita DHP481Z Features

  • Brushless BLDC motor specially designed to provide, above all, more work amount on a single full battery charge
  • Forward/reverse rotation
  • Single sleeve keyless chuck allows for easy bit installation/removal by one hand
  • Electric brake
  • Twin LED job light with afterglow
  • 2 mechanical gears
  • Battery fuel gauge – 3 lights on = more than 50% battery capacity, 2 lights on = 20 to 50% capacity, 1 light on = less than 20% full battery capacity
  • Variable speed control by trigger
  • Best possible ergonomic handle for drill-driver applications
  • Compact overall length of 205mm
  • XPT – Extreme Protection Technology
Twin Pack includes

1 x Makita DHP481Z
1 x Makita DTD170Z

NB: BATTERY, CHARGER & CASE NOT INCLUDED!

 

 

Voltage

18V

Power Source

Battery Cordless

Battery Included?

No (Body Only)

Product Type

Combi Drill, Impact Driver

Number of Batteries

0

Carry Case/Bag Included

No

Battery System

LXT

Brand

Makita

Although a century-old, Makita in terms of power tool manufacturer is relatively younger than its competition on the market. Old is gold, but the new is always better, and Makita is proudly making a name for over 60 years. Founded a year after the outbreak of the First World War, Makita Corporation specialized in the mass production and maintenance of electric motors. Offering a versatile specter of appliances, the tools are equally preferred by DIY enthusiasts and professionals around the globe. The company evolves constantly, fulfilling the needs of its clients, aiming for more user-friendly design and experience.

Reviews

There are no reviews yet.

Be the first to review “Makita LXT Twin Pack 18V DTD170Z Impact Driver + DHP481Z Combi Drill”

Your email address will not be published. Required fields are marked *

Fast & Free Shipping

Guaranteed Safe Checkout

Easy 60 Days Returns

Official Warranty

Scroll to Top