Compact professional cordless angle grinder kit with higher-capacity batteries for fabrication, metal cutting, weld preparation and mobile site work
The DeWalt DCG404M2B is an 18V XR Compact cordless angle grinder kit configured for professional metal cutting, grinding, deburring and weld preparation. The DCG404 platform uses a brushless motor delivering up to 760 MWO and drives 125 mm accessories at a no-load speed of 11,000 rpm. Its compact architecture reduces tool bulk for improved access around fabricated assemblies, structural steelwork and restricted installation areas, while the M14 spindle provides compatibility with appropriate professional 125 mm grinding and cutting accessories.
Electronic brake and clutch systems provide additional control during demanding cutting and grinding operations. The electronic brake rapidly stops the rotating accessory after the paddle trigger is released, while the electronic clutch reduces reaction if the disc pinches or stalls. Electronic soft start controls initial acceleration and mesh debris screens help restrict abrasive particles entering the motor and electronics. This DCG404M2B configuration adds two 18V XR 4.0 Ah batteries, a compatible charger and a 15 inch tool bag, providing greater battery capacity than the 2.0 Ah DCG404D2B configuration while retaining the same compact grinder platform.
Specifications:
- Manufacturer: DeWalt
- Model: DCG404M2B
- Product Type: Cordless compact angle grinder kit
- Battery Platform: DeWalt 18V XR
- Voltage: 18 V
- Motor Type: Brushless
- Maximum Power Output: 760 MWO
- Disc Diameter: 125 mm
- No-Load Speed: 11,000 rpm
- Spindle Thread: M14
- Bare Tool Weight: 1.56 kg
- Variable Speed: No
- Electronic Brake: Yes
- Electronic Clutch: Yes
- Electronic Soft Start: Yes
- Switch Type: Paddle
- Auxiliary Handle Positions: 2
- Mesh Debris Screens: Yes
- Battery Quantity: 2
- Battery Voltage: 18 V
- Battery Capacity: 4.0 Ah each
- Total Nominal Battery Energy: 144 Wh across two batteries
- Charger Included: Yes
Package Contents:
- 1 x DeWalt DCG404 18V XR Brushless Compact 125 mm Angle Grinder
- 2 x DeWalt 18V XR 4.0 Ah Batteries
- 1 x DeWalt 18V XR Battery Charger
- 1 x Side Handle
- 1 x Grinding Guard
- 1 x Clip-On Cutting Guard
- 1 x Hex Wrench
- 1 x 15 Inch Tool Bag
Note: The DCG404M2B configuration includes two 18V XR 4.0 Ah batteries, charger and 15 inch tool bag. The grinder operates within the DeWalt 18V XR battery platform. Use only compatible 125 mm accessories with the correct mounting specification and a permitted rotational speed suitable for the grinder’s 11,000 rpm no-load speed.
Reviews
There are no reviews yet.