Compact professional cordless angle grinder for metal cutting, weld dressing, fabrication and site work where access and tool control are critical
The DeWalt DCG404N-XJ is an 18V XR Compact cordless angle grinder built around a 32 mm brushless motor delivering up to 760 MWO. Its 125 mm disc capacity and 11,000 rpm no-load speed provide the cutting and grinding performance required for steel fabrication, threaded rod, profiles, sheet metal and weld preparation while the reduced-volume body improves access in restricted areas. An M14 spindle accepts standard professional 125 mm grinder accessories, and the 1.56 kg bare-tool weight reduces the mass carried during repetitive or overhead work.
Electronic protection is a significant distinction within the DCG404 platform. The electronic brake stops the wheel rapidly after the paddle trigger is released, while the electronic clutch reduces kickback reaction if the disc pinches or stalls. Electronic soft start controls initial acceleration for more predictable engagement with the workpiece. Mesh debris covers restrict abrasive dust and particles entering the motor and electronics, while the rubber overmould and two-position auxiliary handle provide additional control during cutting and grinding operations.
Specifications:
- Manufacturer: DeWalt
- Model: DCG404N-XJ
- Product Type: Cordless compact angle grinder
- Battery Platform: DeWalt 18V XR
- Voltage: 18 V
- Motor Type: Brushless
- Motor Diameter: 32 mm
- Maximum Power Output: 760 MWO
- Disc Diameter: 125 mm
- No-Load Speed: 11,000 rpm
- Spindle Thread: M14
- Spindle Length: 21.5 mm
- Bare Tool Weight: 1.56 kg
- Variable Speed: No
- Electronic Brake: Yes
- Electronic Clutch: Yes
- Electronic Soft Start: Yes
- Switch Type: Paddle
- Auxiliary Handle Positions: 2
- Mesh Debris Covers: Yes
- Battery Included: No
- Charger Included: No
- EAN: 5035048834510
Package Contents:
- 1 x DeWalt DCG404N-XJ 18V XR Compact 125 mm Angle Grinder
- 1 x Side Handle
- 1 x Grinding Guard
- 1 x Clip-On Cutting Guard
- 1 x Hex Wrench
Note: The DCG404N-XJ is supplied as a body-only machine with no battery or charger. It operates on the DeWalt 18V XR battery platform. Use 125 mm cutting, grinding or finishing accessories with the correct M14 mounting system and a rated maximum rotational speed appropriate for the grinder’s 11,000 rpm no-load speed.
Reviews
There are no reviews yet.