Compact professional cordless angle grinder kit with 5.0 Ah batteries for sustained fabrication, metal cutting, weld preparation and mobile site work
The DeWalt DCG404P2B is an 18V XR Compact cordless angle grinder kit configured around the DCG404 brushless 125 mm grinder. The machine delivers up to 760 MWO and operates at a no-load speed of 11,000 rpm, providing the output required for cutting steel profiles and threaded rod, grinding welds, deburring fabricated components and preparing metal surfaces. Its compact architecture reduces bulk where access is restricted, while the M14 spindle accepts appropriate professional 125 mm cutting, grinding and finishing accessories.
Electronic brake and clutch systems support controlled operation during demanding cutting and grinding work. The electronic brake rapidly stops the rotating accessory after the paddle trigger is released, while the electronic clutch reduces reaction if the disc pinches or stalls. Electronic soft start controls initial acceleration and removable mesh debris screens help restrict abrasive particles entering the motor and electronics. This DCG404P2B configuration adds two 18V XR 5.0 Ah batteries, a compatible charger and a 15 inch tool bag, increasing available battery capacity over the D2B 2.0 Ah and M2B 4.0 Ah configurations.
Specifications:
- Manufacturer: DeWalt
- Model: DCG404P2B
- Product Type: Cordless compact angle grinder kit
- Battery Platform: DeWalt 18V XR
- Voltage: 18 V
- Motor Type: Brushless
- Maximum Power Output: 760 MWO
- Disc Diameter: 125 mm
- No-Load Speed: 11,000 rpm
- Spindle Thread: M14
- Bare Tool Weight: 1.56 kg
- Variable Speed: No
- Electronic Brake: Yes
- Electronic Clutch: Yes
- Electronic Soft Start: Yes
- Switch Type: Paddle
- Auxiliary Handle Positions: 2
- Mesh Debris Screens: Yes
- Battery Quantity: 2
- Battery Voltage: 18 V
- Battery Capacity: 5.0 Ah each
- Nominal Energy Per Battery: 90 Wh
- Total Nominal Battery Energy: 180 Wh
- Charger Included: Yes
Package Contents:
- 1 x DeWalt DCG404 18V XR Brushless Compact 125 mm Angle Grinder
- 2 x DeWalt 18V XR 5.0 Ah Batteries
- 1 x DeWalt 18V XR Battery Charger
- 1 x Side Handle
- 1 x Grinding Guard
- 1 x Clip-On Cutting Guard
- 1 x Hex Wrench
- 1 x 15 Inch Tool Bag
Note: The DCG404P2B configuration includes two 18V XR 5.0 Ah batteries, charger and 15 inch tool bag. The grinder operates on the DeWalt 18V XR battery platform. Use 125 mm accessories with the correct mounting specification and a permitted rotational speed suitable for the grinder’s 11,000 rpm no-load speed.
Reviews
There are no reviews yet.